Mechanic | ||
---|---|---|
Plated through holes | +0,10 / -0,05mm | |
Non-plated through holes | +0,10 / -0,10mm | |
Hole to hole in one run | +0,05 / -0,05mm | |
Contour routed |
≤ 0 - 30mm > 30 - 120mm > 120 - 200mm > 200 - 400mm > 400mm |
+0,10 / -0,10mm +0,15 / -0,15mm +0,20 / -0,20mm each 100mm further +/- 0,050mm |
Contour scored Scored and routed |
DIN ISO 2768 middle DIN ISO 2768 middle |
|
Outline to non-plated hole, contour routed |
+0,10 / -0,10mm | |
Outline to non-plated hole, contour scored |
+0,15 / -0,15mm | |
Drill to contour Contour routed Contour scored Contour routed/scored Contour routed/scored |
0,50–6,00mm 0,50–6,00mm 6,00–30,00mm ≥ 30,00mm |
+0,10 / -0,10mm +0,15 / -0,15mm +0,20 / -0,20mm +0,30 / -0,30mm |
Image to drill | +0,10 / -0,10mm |